LVM60 Greenhouse Curtain Motor With Guide Wheels
$375.00 – $410.00Price range: $375.00 through $410.00
Single output, low voltage, DC motor
Interchangeable guide wheel set to switch between Left and Right Output
Add an adapter for your roll bar by clicking through the options below!
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Roll Bar Type/Size (for Adapter) | 1.3″ OD Pipe, Side Clasp, 1.6″ OD Pipe, No Adapter Needed |
**The LVM60 Greenhouse Curtain Motor is designed to lift up to a 1250 sq. ft. single bar curtain or up to a 625 sq. ft. double bar curtain (square footage measured Length X Width)**
The LVM60 Greenhouse Curtain Motor comes complete with the guide wheel set and has been specially designed to meet the demands of greenhouses. These compact and lightweight motors are able to take your ventilation to a more efficient operation.
You can automate your curtain ventilation by using one of our environmental controllers or use interface boxes to connect to your existing ventilation system.
Motor Specifications: 24 VDC, 60 NM, 3A, 72 W, 2.7 RPM, 40 Rev, 0.78″ (20mm) OD output shaft
Features
- Easy access limit switches (directional limits)
- Interchangeable guide wheel assembly to change Left or Right output of motor
- Compact, quiet, and light weight
- Our innovative low-bind guide wheels for longer motor life
- Innovative roll bar adapter system for multiple roll bar adapters
- Our own U.S. based tech support & repair options at 1-877-546-2257
- 4 Year Limited Warranty for a lower total cost of ownership
- When used with one of our controllers or separate approved controller
1 review for LVM60 Greenhouse Curtain Motor With Guide Wheels
You may also like…
VCU2-24 Environmental Controller
Roll Bar Adapters
Low Voltage Limit Switch
Limit Switch Assembly for Low Voltage Motors. Required for all Roll Lock Curtain and Rack & Pinion installations. Required to override
Guide Pipe
Related products
LVM100 Greenhouse Curtain Motor With Guide Wheels
Single output, low voltage, DC motor
Interchangeable guide wheel set to switch between Left and Right Output
Add an adapter for your roll bar by clicking through the options below!
Wind Rope
Crank Handles
Crank Handles & Drill Cranks, with hook for loop input gears: 7:1, 13:1, and 15:1 Prop 65 WARNING: This product
LVM1002D With Guide Wheels
Dual output, low voltage, DC motor
Click through the options below to pick available roll bar adapters!

Glenn Griffith –
ive got 3 of theae sitting on a shelf because the shaft snapped and there doesnt seem to be a way to get component parts. they work great when the work but if it get bound in anyway say goodbye to your 400 bucks.
Chris Hume –
Sorry to hear about the snapped shafts, and thanks for the feedback. We’d like to help you get those three units running again. Could you give us a call at 877-546-2257? We can look at replacement parts or repair options and also find out what happened.