Gear Chain Wheel Crank 10:1 For Sidewall Curtains
$375.00
| Weight | 19.9 lbs |
|---|---|
| Dimensions | 8.06 × 6.906 × 7.5 in |
Gear Chain Wheel Assembly 10:1 ratio, 2 directional 5/8″ output shafts w/ 4 wheel guide assembly, 26′ chain and chain bracket. (Order needed adapter separately)
Related products
LVM60 Greenhouse Curtain Motor With Guide Wheels
Single output, low voltage, DC motor
Interchangeable guide wheel set to switch between Left and Right Output
Add an adapter for your roll bar by clicking through the options below!
Single Output, Internal Brake
Manual operator with a 1/2″ square adapter slot and guide wheels. Choose from hand or drill powered and easy rolling
Temperature Sensor for Greenhouse Controller
Ventilation control greenhouse temperature sensor. For use with all Advancing Alternatives environmental controllers purchased 2010 or later. Choose from 100′
Single Output, Hand Brake
Manual operator with 0.625″ output shaft, guide wheels and handle that serves as a brake. This is a manual hand
Sealed Sidewall Curtain Inflation Kit
4′ Guide Pipe Extension
Soft Roof Roll Up Curtain
Enables a ventilation opening above the gutters of your greenhouse without the weight and expense of a rack and pinion system. Provides a means of locking the roll bar in the closed position for structural stability, insulation and wind control. Combined with independent double-layer poly inflation and weather override, this is the best value in roof venting.

Reviews
There are no reviews yet.