LVM180 Greenhouse Curtain Motor
$675.00 – $725.00
LVM1002D With Guide Wheels
$550.00 – $620.00
Dual output, low voltage, DC motor
Click through the options below to pick available roll bar adapters!
Weight | N/A |
---|---|
Dimensions | N/A |
Roll Bar Type/Size (for Adapter) |
1.3" OD Pipe ,1.6" OD Pipe ,Side Clasp ,No Adapter Needed |
SKU:
LVM1002D-GW
Categories: Greenhouse Curtain Motors, Greenhouse Vent Drives
Description
**This motor is designed to lift up to a 1750 sq. ft. single bar curtain or up to a 875 sq. ft. double bar curtain (square footage measured Length x Width)**
Our LVM1002D has been specially designed to meet the unique demands of the greenhouse and barn. Provides the necessary torque required to drive your medium sized curtains.
Automate using one of our environmental controllers or integrate into your existing system with one of our interface boxes.
Motor Specifications:Â 24 VDC, 100 NM, 4.2 A, 100 W, 3 RPM, 40 Rev, 0.78″ (20mm) OD output shafts
Features
- Easy access limit switches (directional limits)
- Compact, quiet, and light weight
- Our innovative low-bind guide wheels for longer motor life
- Innovative roll bar adapter system for multiple roll bar adapter
- 5 Year Limited Warranty for a lower total cost of ownership
- When used with one of our controllers or separate approved controller
Reviews (0)
Be the first to review “LVM1002D With Guide Wheels” Cancel reply
Resources
FAQ
You may also like…
VCU2-24 Environmental Controller
$1,050.00
AegisTEC+ Greenhouse Controller
$2,050.00
Roll Bar Adapters
$15.00 – $120.00
Select options
This product has multiple variants. The options may be chosen on the product page
Low Voltage Limit Switch
$125.00 – $165.00
Limit Switch Assembly for Low Voltage Motors Required for all Roll Lock Curtain and Rack & Pinion installations Required to
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
LVM100 Greenhouse Curtain Motor
$425.00 – $460.00
Single output, low voltage, DC motor
Interchangeable guide wheel set to switch between Left and Right Output
Add an adapter for your roll bar by clicking through the options below!
Select options
This product has multiple variants. The options may be chosen on the product page
Crank Handles
$25.00 – $45.00
Crank Handles & Drill Cranks, with hook for loop input gears: 7:1, 13:1, and 15:1 Prop 65 WARNING: This product
Select options
This product has multiple variants. The options may be chosen on the product page
LVM180 Greenhouse Curtain Motor
$675.00 – $725.00
Single output, low voltage, DC motor
Click through the options below to specify output direction and pick an available roll bar adapter!
Select options
This product has multiple variants. The options may be chosen on the product page
LVM-1802D-GW
$825.00
Reviews
There are no reviews yet.