LVM100 Greenhouse Rack and Pinion Motor

**The LVM100 Greenhouse Rack and Pinion Motor is designed to lift up to an 400 sq. ft. Rack & Pinion curtain (square footage measured Length x Width)**

Included with the LVM100 greenhouse rack and pinion motor is: the mounting plate and hardware, external limit switch, and (2) universal 1.3″ or 1.6″ drive shaft adapters (fits inside 1.315″ OD or 1.66″ OD, 16 gauge pipe)

We understand low voltage vent drives and your needs for a powerful, reliable motor.  The LVM100 has been specially designed to meet the unique demands of a rack and pinion ventilation systems.

You can automate this motor by using one of our environmental controllers or integrate it into your existing system with one of our interface boxes.

Motor Specifications:  24 VDC, 100 NM, 4.2 A, 100 W, 3 RPM, 40 Rev, 0.78″ (20mm) OD output shafts

• 4 Year Warranty for a lower total cost of ownership
• Our innovative low-bind guide wheels for longer motor life
• Our own U.S. based tech support & repair options at 1-877-546-2257
• Innovative roll bar adapter system for multiple roll bar adapters
• Drives rack & pinion vents, shade systems, and ventilation curtains
• Easy access limit switches (directional limits)
• Supplied with stationary mounting bracket
• 4 year limited warranty
  • When used with one of our controllers or separate approved controller