Not eligible for free shipping. Adding it to your cart voids free shipping.
1.5″ Greenhouse Galvanized Square Tubing – Swaged
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)
$30.00
Weight | 10 lbs |
---|---|
Dimensions | 98 × 2 × 2 in |
SKU:
73-ST1.5-96-16S
Categories: Greenhouse Construction Materials, Greenhouse Pipe & Tubing
Tag: prop65
Description
1.5″ Greenhouse Galvanized Square Swaged Steel Tubing 8′ length, 16 gauge

Reviews (1)
1 review for 1.5″ Greenhouse Galvanized Square Tubing – Swaged
Add a review Cancel reply
Resources
FAQ
Related products
6 Foot End Cap for 8mm Polycarbonate Sheets
$9.00
Woven Curtain Fabric
$1.89 – $2.52
Reinforced woven polyethylene 4.7 oz. (160 gsm). 87% light transmission. Sold by linear foot. Available in 6′, 8′ and 13′
Select options
This product has multiple variants. The options may be chosen on the product page
Open/Closed Eye Bolts for Greenhouses
$0.32 – $2.40
Open/closed eye bolt options for various uses in your greenhouse. Whether it’s for hanging guide pipe or threading wind rope
Select options
This product has multiple variants. The options may be chosen on the product page
Econoline Roll Bar 8′
$35.20
Greenhouse Slant Wall Fan
$795.00 – $1,670.00
The Typhoon slant wall fan is built with a heavy gauge galvanized housing and X-frame motor mount to provide a
Select options
This product has multiple variants. The options may be chosen on the product page
Modine Effinity 93 Heater
$2,805.00 – $5,445.00
The Modine Effinity 93 series condensing unit heater offers the highest efficiency available in North America for commercial or industrial
Select options
This product has multiple variants. The options may be chosen on the product page
Modine PDP Greenhouse Heater
$1,680.00 – $2,380.00
The Modine PDP gas-fired unit heaters feature a blower-powered vent exhaust. This vent forces heater exhaust fumes outside of the
Select options
This product has multiple variants. The options may be chosen on the product page
Bill biessenberger –
2/12/ x 2/12 x6 in One in needs to slide inside the 2 1/2 in.² tubing