**This Rack and Pinion vent motor LVM200 will lift up to an 800 sq. ft. Rack & Pinion curtain (square footage measured Length x Width)**
Included: LVM200 motor, mounting plate and hardware, external limit switch, and (2) universal 1.3″ or 1.6″ drive shaft adapters (fits inside 1.315″ OD or 1.66″ OD, 16 gauge pipe).
We understand low voltage vent drives and your needs for a powerful, reliable motor. For that reason the LVM200, with its special design, meets the unique demands of larger rack and pinion ventilation systems.
In addition, don’t forget to use one of our environmental controllers for automating your ventilation. Or you can integrate this motor into your existing system with one of our interface boxes.
Motor Specifications in detail: 24 VDC, 200 NM, 14 A, 250 W, 6 RPM, 40 Rev, 0.875″ (22mm) OD output shafts
Low Voltage Limit Switch - Rack & Pinion
Roll Bar Adapters
100' Temperature Sensor