LVM200 Greenhouse Rack and Pinion Motor
$80000
**The LVM200 Greenhouse Rack and Pinion Motor is designed to lift up to an 800 sq. ft. Rack & Pinion curtain (square footage measured Length x Width)**
Included with the LVM200 greenhouse rack and pinion motor is: the mounting plate, external limit switch, and (2) universal 1.3″ or 1.6″ drive shaft adapters (fits inside 1.315″ OD or 1.66″ OD, 16 gauge pipe), and all necessary hardware.
The LVM200, with its special design, meets the unique demands of larger rack and pinion ventilation systems, showing that understand low voltage vent drives and your needs for a powerful, reliable motor.
Don’t forget to use one of our environmental controllers for automating your ventilation. You can also integrate this motor into your existing system with one of our interface boxes.
Features
- 4 Year Warranty for a lower total cost of ownership
- Our innovative low-bind guide wheels for longer motor life
- Our own U.S. based tech support & repair options at 1-877-546-2257
- Innovative roll bar adapter system for multiple roll bar adapters
Motor Specifications in detail: 24 VDC, 200 NM, 14 A, 250 W, 6 RPM, 40 Rev, 0.875″ (22mm) OD output shafts
- This motor system drives rack & pinion vents, shade systems, and large ventilation curtains
- Equipped with easy access limit switches (directional limits)
- Supplied with stationary mounting bracket
- 4 year limited warranty
- When used with one of our controllers or separate approved controller
